480 Watt 2 channel amplifier
  • MOSFET Power Supply

  • High Current Toshiba Output Transistors
  • NJM4580 Low Noise, Low Distortion Op-Amps
  • Optimized Class AB Design Minimizes Distortion and
  • Reduces Idle Current
  • Designed to Drive 4-Ohm and 2-Ohm Loads
  • Continuously Variable Low-Pass Filter: 40 ? 300Hz (12dB / Octave)
  • Continuously Variable High-Pass Filter: 40 ? 300Hz (12dB / Octave)
  • Continuously Variable Bass EQ: 0 ~ 12 dB at 45Hz
  • Pass-Thru RCA's
  • Short Circuit, DC-Offset and Thermal Overload Protection
  • Diagnostic LED's: Red-Power / Amber-Fault

Bragging Rights
The Jensen DUB Edition amplifiers provide the hard hitting in your face sound you have come to expect from the Jensen iconic audio brand. The DUBa2100features 400 Watts peak output power driven by a MOSFET power supply with high current Toshiba output transistors offering impressive power and extensive controls for fine-tuning your sound - an ideal way to boost your music's intensity and clarity. Its sleek design was influenced by DUB and makes it compatible with any car interior adding a touch of edge and sexiness.

With a rated RMS of 80 Watts x 2-Channels @ 4-Ohms and additional power output120 Watts x 2-Channels @ 2-Ohms and 225 Watts x 1-Channel at the bridged impedance of 4-Ohms this Jensen DUB Edition 2 class AB 2-channel amplifier is sure to satisfy your need for power. With this much power you will be able to power high speakers or even a decent subwoofer at the bridged impedance.

This amplifier features superior audiophile sound quality and will provide constant reliable power so that you can keep playing louder and longer. Its offset and Thermal Overload Protection technology will keep the amp from overheating or shutting down. This will not only protect you amplifier and subs but also your vehicle from any unwanted blowout or power spark.
The variable crossover will allow you complete control of your music reproduction giving you the best this amplifier and your music as to offer.

CEA Specifications:
Power Output: 80 Watts RMS x 2-Channels Into 4-Ohms @ 1% THD+N
Signal to Noise Ratio: 100dBA Below Reference (Reference: 1 Watt, 4-Ohms)

Additional Power Output:
120 Watts RMS x 2-Channel Into 2-Ohms @ 1% THD+N
235 Watts RMS x 1-Channel (Bridged) Into 4-Ohms @ 1% THD+N
Frequency Response: 10 Hz - 60 kHz, -3dB (Reference: 1 Watt)

RMS Output Power @ 2% THD+N, 1kHz, 14.4VDC    Stereo 2x125 Watts, 2-Ohm
Stereo 2x125 Watts, 2-Ohm
Bridged 1x240 Watts, 4-Ohm
Impedance    2 / 4-Ohm
Frequency Response    10Hz - 60 kHz, -3dB
THD+N @ 1 kHz, 1 Watt    0.02%, 4-Ohm, 14.4VDC
Signal to Noise Ratio    >100dB (Rated Power)
Input Sensitivity    400mV-5V
Weight (Kg/lb)    4.6 lbs
Input Impedance    20k Ohms Nominal
Fuse/Type    1 x 25 Amp ATO Fuse
Size    L 11.25" x H 2.0" x W 8.1"