6-inch x 9-inch three way speaker with 1-inch voice coil
  • 6" x 9" Three-Way Speaker w/1"Voice Coil

  • 25mm Silk dome Tweeter / 13mm Silk dome Super Tweeter
  • Injection Molded Polypropylene Cone w/ Rubber Surround
  • Sensitivity (2.83V/1M): 95Db
  • Heavy Duty Motor Structure w/4.5mm Xmax
  • Grills Included

Bragging Rights
Your ride will be rocking when you upgrade your factory audio system to the 6" x 9" Jensen DUB Edition Car Speakers. The DUBs369 3-way car speakers offer great depth of sound and high frequency response range, so you can hear every note of your favorite music as a result of the (1) 25mm silk dome tweeter and (1) 13mm silk dome super tweeter as well as an injection molded polypropylene cone with rubber surround and a heavy duty motor structure with 3.5mm Xmax.

This pair of speakers has been crafted above all for exceptional audio performance with maximum power handling of 400 Watts (100 Watts RMS) offering a frequency response of 32Hz~35kHz and 4-Ohm impedance. The aggressive design of the Jensen DUB Edition car speakers are black with silver accents ready to suit any vehicles interior and are designed with a shallow mounting depth for easy install into a wide variety of vehicles.

CEA Specifications:
Power Handling: 100 Watts RMS / 400 Watts Peak
Frequency Response: 32Hz~35kHz
Impedance: 4-Ohm
Mounting Depth: 3.35"
Mounting Cutout: 5.9" x 8.58"

System Type    6" x 9" three-way speaker with 25mm silk dome mid-tweeter and 13mm silk dome supertweeter
Impedance    4 Ohms
Frequency Response    32Hz - 35kHz
Total Peak Power    400W
RMS Power    100W
Efficiency 1W / 1M    91dB
Efficiency 2.83V / 1M    94dB
Xmax    4.5mm
Type    3-way
Diameter    6" x 9"
Tweeter    25mm silk dome
Supertweeter    13mm silk dome
Woofer Cone Material    Polypropylene w/ mica flake
Woofer Surround Material    NBR (Nitrile Butadiene Rubber)
Woofer Spider    Nomex fiber blend
Vented Spider    No
Woofer Voice Coil Diameter    1" (25mm)
Woofer Magnet Weight    20
Woofer Basket    Stamped steel with textured black paint
Terminals    0.205" and 0.110" tab
Grille    Yes
Grille Height    29mm (1.15")
Tweeter Height (from mounting surface)    11mm (0.43")
Mounting Cutout    150mm x 218mm (5.9" x 8.58")
Mounting Depth    85mm (3.35")