CAR910W Firmware Update


CAR910W Firmware Update



This update addresses the following:
• Improves the screen resolution while in Apple CarPlay or Android Auto
• Updates GPS location
• Fixes an issue when using the Waze app
• Improves USB random playback issue

Note: Software is not interchangeable between models. Please do not attempt this update on any other model then the CAR910W

Download File: CAR910W Firmware Update

How to Update:

1. Download the firmware file from the link above.
2. Unzip the downloaded file. (NOTE: To unzip the file, the program WINRAR is required and can be downloaded from this link: https://www.rarlab.com/download.htm)
3. Copy the 2 ISPBOOT.BIN files to an empty USB Thumb Drive formatted to FAT32.
4. With the vehicle Off , insert the USB Thumb Drive with Update Firmware into the CAR910W USB Port.
5. Turn the vehicle On, the radio will boot up with the update screen.
6. Once the update is complete, remove the USB thumb drive and turn the radio off and then back on so the firmware update is completed.
7. Delete the 2 ISPBOOT files from the thumb drive and place the sppf_Autochips.img and DownLoad.bin file onto the USB stick and repeat the same update.
8. The update is now complete.


To check that the update was done correctly, goto Settings and press Others and then press System Version. If you see he below information, the update was done correctly.
- Version: CAR910W
- Date: 20210904_1717
- SDK: 53.0.5.0.0.0.2.1
- MCU: SP_A_304_20210806_01.AJO.E


This update addresses the following: Adds enhanced Brightness Control

Note: Software is not interchangeable between models. Please do not attempt this update on any other model then the CAR910W

Download File: CAR910W Firmware Update

How to Update:

1. Download the firmware file from the link above.
2. Unzip the downloaded file.
3. Copy the 2 ISPBOOT.BIN files to an empty USB Thumb Drive formatted to FAT32.
4. With the vehicle Off , insert the USB Thumb Drive with Update Firmware into the CAR910W USB Port.
5. Turn the vehicle On, the radio will boot up with the update screen.
6. Once the update is complete, the radio will shut down and power back up.
7. Remove the USB Thumb Drive from the unit.
8. The update is now complete.

To check that the update was done correctly, goto Settings and press Others and then press System Version. If you see he below information, the update was done correctly.
- Version: CAR910W
- Date: 20210820_1540
- SDK: 53.0.5.0.0.0.2.1
- Mcu: SP_A_304_20210806_01.AJO.E

© 2021 NAMSUNG AMERICA INC. ALL RIGHTS RESERVED. *PRODUCT SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.