1. Product: 7″ Multimedia Receiver with USB Screen Mirroring – CM701MIR
Product URL: https://jensenmobile.com/shop/multimedia/cm701mir/
Firmware Links:
    If you are having issues with the USB Mirroring feature functioning properly, the below firmware download will fix the issue. Note: Software is not interchangeable between models. Please do not attempt this update on any other model then the CM701MIR Download File: CM701MIR Firmware How to Update:
    1. Download the firmware file from the link above.
    2. Unzip the downloaded file. (NOTE: To unzip the file, the program WINRAR is required and can be downloaded from this link: https://www.rarlab.com/download.htm)
    3. Copy the S361T.abs file to an empty USB Thumb Drive formatted to FAT32.
    4. With the vehicle Off, insert the USB Thumb Drive with the updated firmware into the CM701MIR USB Port.
    5. Turn the vehicle On, press the Home icon in the top left corner of the screen, and select USB Mirroring from the main screen. You will see the current software version towards the bottom in the middle of the screen (S361TC8HV042VW). The update is performed automatically
    6. When the message PLS reboot! Is displayed, turn the vehicle Off and remove the USB thumb drive. The update is now complete. The updated software version will now read (S361TC8HV043VW).
    7. The radio is now ready to use the USB Mirroring feature

Pass
2. Product: Mechless Receiver with Bluetooth and Push to Talk – MPR210
Product URL: https://jensenmobile.com/shop/receivers/mpr210/
Firmware Links:
    MPR210 Firmware Update This update addresses the following:
    • Fixes a Mute issue while playing audiobooks in Bluetooth mode
    Note: Software is not interchangeable between models. Please do not attempt this update on any other model then the MPR210 Download File: MPR210 Firmware Update How to Update:
    1. Download the firmware file from the link above.
    2. Copy the AH1808.upd file to an empty USB Thumb Drive formatted to FAT32.
    3. Insert the USB Thumb Drive with Update Firmware into the MPR210 USB Port.
    4. The word "USB" will be displayed on LCD and head unit automatically shut down
    5. While updating, the word "USB" will still slightly be seen in the LCD display.
    6. Once the text has completely disappeared, press any button on the panel to turn on the head unit.
    7. Once the upgrade is complete remove the USB drive.

Pass
3. Product: 7″ Multimedia Receiver with Apple CarPlay and Android Auto – CAR710
Product URL: https://jensenmobile.com/shop/multimedia/car710/
Firmware Links:
    This update addresses the following: • Improves the screen resolution while in Apple CarPlay or Android Auto • Add programmable volume control in the Settings menu Note: Software is not interchangeable between models. Please do not attempt this update on any other model then the CAR710 Download File: CAR710 Firmware Update How to Update: 1. Download the firmware file from the link above. 2. Unzip the downloaded file. (NOTE: To unzip the file, the program WINRAR is required and can be downloaded from this link: https://www.rarlab.com/download.htm) 3. Copy the 2 ISPBOOT.BIN files to an empty USB Thumb Drive formatted to FAT32. 4. With the vehicle Off, insert the USB Thumb Drive with Update Firmware into the CAR710 USB Port. 5. Turn the vehicle On, the radio will boot up with the update screen. 6. Once the update is complete, remove the USB thumb drive and turn the radio off and then back on so the firmware update is completed. 7. The update is now complete. To check that the update was done correctly, go to Settings and press Others and then press System Version. If you see information listed below, the update was done correctly. - Version: CAR710 V1.0 - Date: 20220810_1124 - SDK: 24.0.2.2.2.0.1.0 - Mcu: SP_24_20200717_01

Pass
4. Product: 7″ Receiver with Wireless Apple CarPlay and Android Auto – CAR710W
Product URL: https://jensenmobile.com/shop/multimedia/car710w/
Firmware Links:
    This update addresses the following:
    • Improves the screen resolution while in Apple CarPlay or Android Auto
    • Fixes an issue when using the Waze app
    • Improves USB random playback issue
    • Updates GPS location
    • Fixes an issue of the steering wheel controls with SiriusXM
    • Add programmable volume feature
    Note: Software is not interchangeable between models. Please do not attempt this update on any other model then the CAR710W Download File: CAR710W Firmware How to Update:
    1. Download the firmware file from the link above.
    2. Unzip the downloaded file. (NOTE: To unzip the file, the program WINRAR is required and can be downloaded from this link: https://www.rarlab.com/download.htm)
    3. Copy the 2 ISPBOOT.BIN files to an empty USB Thumb Drive formatted to FAT32.
    4. With the vehicle Off, insert the USB Thumb Drive with Update Firmware into the CAR710W USB Port.
    5. Turn the vehicle On, the radio will boot up with the update screen.
    6. Once the update is complete, remove the USB thumb drive and turn the radio off and then back on so the firmware update is completed.
    7. The updates are now completed.
    To check that the update was done correctly, go to Settings and press Others and then press System Version. If you see the information listed below, the update was done correctly. – Version: CAR710W V1.0 8368U –  Date: 20221117_1909 – SDK: 54.0.16.0.0.0.4.0 – MCU: SP_H_303_20221025_01_BJ0.W  

Pass
5. Product: 7″ Receiver with Apple CarPlay and Android Auto – CAR710X
Product URL: https://jensenmobile.com/shop/multimedia/car710x/
Firmware Links:
    This update addresses the following: Improves the screen resolution while in Apple CarPlay or Android Auto Note: Software is not interchangeable between models. Please do not attempt this update on any other model then the CAR710X Download File: CAR710X Firmware Update How to Update: 1. Download the firmware file from the link above. 2. Unzip the downloaded file. (NOTE: To unzip the file, the program WINRAR is required and can be downloaded from this link: https://www.rarlab.com/download.htm) 3. Copy the 2 ISPBOOT.BIN files to an empty USB Thumb Drive formatted to FAT32. 4. With the vehicle Off, insert the USB Thumb Drive with Update Firmware into the CAR710X USB Port. 5. Turn the vehicle On, the radio will boot up with the update screen. 6. Once the update is complete, remove the USB thumb drive and turn the radio off and then back on so the firmware update is completed. 7. The update is now complete. To check that the update was done correctly, go to Settings and press Others and then press System Version. If you see the information listed below, the update was done correctly. - Version: CAR710X V1.3 - Date: 20210513_1912 - SDK: 24.0.2.2.2.0.1.0 - Mcu: SP_46_20201201_01

Pass
6. Product: 10.1″ CD/DVD Multimedia Receiver with Apple CarPlay and Android Auto – CAR8000
Product URL: https://jensenmobile.com/shop/multimedia/car8000/
Firmware Links:
    CAR8000 Firmware Update <!--Download the file: Adds Brightness Control Menu in Setting Menu Download the update procedures file: CAR1000 Update Procedures Note: Software is not interchangeable between models. Please do not attempt this update on any other model then the CAR8000. This update addresses the following: Fixes clock issue Adds date to home screen
    --> This update addresses the following: Adds Brightness Control Menu to Setting Menu Note: Software is not interchangeable between models. Please do not attempt this update on any other model then the CAR8000 Download File: CAR8000 Firmware Update How to Update:
    1. Download the firmware file from the link above.
    2. Unzip the downloaded file.
    3. Copy the 2 ISPBOOT.BIN files to an empty USB Thumb Drive formatted to FAT32.
    4. With the vehicle Off, insert the USB Thumb Drive with Update Firmware into the CAR8000 USB Port.
    5. Turn the vehicle On, the radio will boot up with the update screen.
    6. Once the update is complete, the radio will shut down and power back up.
    7. Remove the USB Thumb Drive from the unit.
    8. The update is now complete.
    To check that the update was done correctly, go to Settings and press Others and then press System Version. If you see the information listed below, the update was done correctly. – Version: CAR8000 V1.2 – Date: 20210812_1602 – SDK: 24.0.2.2.2.0.1.0 - Mcu: SP_63_20200603_01 - Servo: SAHSD0-ABA-118  

Pass
7. Product: 9″ Receiver with Wireless Apple CarPlay and Android Auto – CAR910W
Product URL: https://jensenmobile.com/shop/multimedia/car910w/
Firmware Links:
    CAR910W Firmware Updates <!--This update addresses the following:
    • Improves the screen resolution while in Apple CarPlay or Android Auto
    • Fixes an issue when using the Waze app
    • Improves USB random playback issue
    • Updates GPS location
    • Adds enhanced Brightness Control
    Note: Software is not interchangeable between models. Please do not attempt this update on any other model then the CAR910W Download File: CAR910W Firmware Update How to Update:
    1. Download the firmware file from the link above.
    2. Copy the 2 ISPBOOOT.BIN files to an empty USB Thumb Drive formatted to FAT32.
    3. With the vehicle Off, insert the USB Thumb Drive with Update Firmware into the CAR910W USB Port.
    4. Turn the vehicle On, the radio will boot up with the update screen.
    5. Once the update is complete, remove the USB thumb drive and turn the radio off and then back on so the firmware update is completed.
    6. The update is now complete.
    To check that the update was done correctly, go to Settings and press Others and then press System Version. If you see the information listed below, the update was done correctly. - Version: CAR910W - Date: 20220123_1701 - SDK: 53.0.5.0.0.0.2.1 - MCU: SP_A_304_20210806_01.AJO.E  --> This update addresses the following:
    • Improves the screen resolution while in Apple CarPlay or Android Auto
    • Fixes an issue when using the Waze app
    • Improves USB random playback issue
    • Updates GPS location
    • Adds enhanced Brightness Control
    • Adds Left hand drive / Right hand drive for CarPlay and Android Auto
    Note: Software is not interchangeable between models. Please do not attempt this update on any other model then the CAR910W Download File:CAR910W Firmware Update How to Update:
    1. Download the firmware file from the link above.
    2. Copy the 2 ISPBOOT.BIN files to an empty USB Thumb Drive formatted to FAT32.
    3. With the vehicle Off , insert the USB Thumb Drive with Update Firmware into the CAR910W USB Port.
    4. Turn the vehicle On, the radio will boot up with the update screen.
    5. Once the update is complete, remove the USB thumb drive and turn the radio off and then back on so the firmware update is completed.
    6. The update is now complete.
    To check that the update was done correctly, go to Settings and press Others and then press System Version. If you see the following information, the update was done correctly. - Version: CAR910W - Date: 20220610_1159 - SDK: 53.0.5.0.0.0.2.1

Pass
8. Product: 9″ Receiver with Apple CarPlay and Android Auto – CAR910X
Product URL: https://jensenmobile.com/shop/multimedia/car910x/
Firmware Links:
    CAR910X Firmware Updates This update addresses the following:
    • Improves the screen resolution while in Apple CarPlay or Android Auto
    • Fixes an issue when using the Waze app
    • Improves USB random playback issue
    • Adds enhanced Brightness Control
    Note: Software is not interchangeable between models. Please do not attempt this update on any other model then the CAR910X Download File: CAR910X Firmware Update How to Update:
    1. Download the firmware file from the link above.
    2. Copy the 2 ISPBOOT.BIN files to an empty USB Thumb Drive formatted to FAT32.
    3. With the vehicle Off , insert the USB Thumb Drive with Update Firmware into the CAR910X USB Port.
    4. Turn the vehicle On, the radio will boot up with the update screen.
    5. Once the update is complete, remove the USB thumb drive and turn the radio off and then back on so the firmware update is completed.
    6. The update is now complete.
    To check that the update was done correctly, go to Settings and press Others and then press System Version. If you see he below information, the update was done correctly. - Version: CAR910X V1.3 - Date: 20211109_1741 - SDK: 24.0.2.2.2.0.1.0 - MCU: SP_80_20200908_01   This update addresses the following:
    • Adds Left hand drive / Right hand drive for CarPlay and Android Auto
    Note: Software is not interchangeable between models. Please do not attempt this update on any other model then the CAR910X Download File: CAR910X Firmware Update How to Update:
    1. Download the firmware file from the link above.
    2. Copy the 2 ISPBOOT.BIN files to an empty USB Thumb Drive formatted to FAT32.
    3. With the vehicle Off , insert the USB Thumb Drive with Update Firmware into the CAR910X USB Port.
    4. Turn the vehicle On, the radio will boot up with the update screen.
    5. Once the update is complete, remove the USB thumb drive and turn the radio off and then back on so the firmware update is completed.
    6. The update is now complete.
    To check that the update was done correctly, go to Settings and press Others and then press System Version. If you see he below information, the update was done correctly. - Version: CAR910X V1.3 - Date: 20220610_1211 - SDK: 24.0.2.2.2.0.1.0

Pass
9. Product: 6.2″ CD/DVD Multimedia Receiver with Bluetooth – CDR6221
Product URL: https://jensenmobile.com/shop/multimedia/cdr6221/
Firmware Links:
    CDR6221 Firmware Update This update addresses the following: Fixes AM/PM Time issue when going into reverse Note: Software is not interchangeable between models. Please do not attempt this update on any other model then the CDR6221 Download File: CDR6221-8288TTDA7786220428A How to Update:
    1. Download the firmware file from the link above.
    2. Unzip the downloaded file.
    3. Copy the dvdrom.bin file to an empty USB Thumb Drive formatted to FAT32.
    4. With the vehicle Off, insert the USB Thumb Drive with Update Firmware into the CDR6221 USB Port.
    5. Turn the vehicle On, the radio will boot up with the update screen.
    6. Once the update is complete, the radio will shut down and power back up.
    7. Remove the USB Thumb Drive from the unit.
    8. The update is now complete.
    To check that the update was done correctly, go to Settings and press Others and then press System Version. If you see the information listed below, the update was done correctly. – Model: CDR6221 – SDK: CS_V2.9.32.0.SN1 – Version: V6221.3204.28a

Pass
10. Product: 7″ Multimedia Receiver with USB Screen Mirroring – CM7MIR
Product URL: https://jensenmobile.com/shop/multimedia/cm7mir/
Firmware Links:
    If you are having issues with the USB Mirroring feature functioning properly, the below firmware download will fix the issue. Note: Software is not interchangeable between models. Please do not attempt this update on any other model then the CM7MIR Download File: CM7MIR Firmware How to Update:
    1. Download the firmware file from the link above.
    2. Unzip the downloaded file. (NOTE: To unzip the file, the program WINRAR is required and can be downloaded from this link: https://www.rarlab.com/download.htm)
    3. Copy the S361T.abs file to an empty USB Thumb Drive formatted to FAT32.
    4. With the vehicle Off, insert the USB Thumb Drive with the updated firmware into the CM701MIR USB Port.
    5. Turn the vehicle On, press the Home icon in the top left corner of the screen, and select USB Mirroring from the main screen. You will see the current software version towards the bottom in the middle of the screen (S361TC8HV042VW). The update is performed automatically
    6. When the message PLS reboot! Is displayed, turn the vehicle Off and remove the USB thumb drive. The update is now complete. The updated software version will now read (S361TC8HV043VW).
    7. The radio is now ready to use the USB Mirroring feature

Pass
11. Product: 7″ Mechless Media Receiver with Bluetooth – CMR270
Product URL: https://jensenmobile.com/shop/multimedia/cmr270/
Firmware Links:
    This update addresses the following: Fixes a volume adjustment issue Software is not interchangeable between models. Please do not attempt this update on any other model then the CMR270 Note: Use this firmware update if your radio starts with the following serial number range only: NSD0001001~ NSD0002035 Download Firmware File: CMR270 Firmware Update Download Firmware File: CMR270 Firmware Instructions Note: Use this firmware update if your radio starts with the following serial number range only: NSD0002036 ~ Present Download Firmware File: CMR270 Firmware Update Download Firmware File: CMR270 Firmware Instructions

Pass
12. Product: 9″ Media Receiver with Apple CarPlay and Android Auto – J1CA9
Product URL: https://jensenmobile.com/shop/multimedia/j1ca9/
Firmware Links:
    This update addresses the following: Improves the screen resolution while in Apple CarPlay or Android Auto Note: Software is not interchangeable between models. Please do not attempt this update on any other model then the J1CA9 Download File: J1CA9 Firmware Update How to Update:
    1. Download the firmware file from the link above.
    2. Unzip the downloaded file.
    3. Copy the 2 ISPBOOT.BIN files to an empty USB Thumb Drive formatted to FAT32.
    4. With the vehicle Off, insert the USB Thumb Drive with Update Firmware into the J1CA9 USB Port.
    5. Turn the vehicle On, the radio will boot up with the update screen.
    6. Once the update is complete, the radio will shut down and power back up.
    7. Remove the USB Thumb Drive from the unit.
    8. The update is now complete.
    To check that the update was done correctly, go to Settings and press Others and then press System Version. If you see the information listed below, the update was done correctly. - Version: J1CA9 V1.0 - Date: 20210108_1214 - SDK: 24.0.2.2.2.0.1.0 - Mcu: SP_A_2_20210108_01 This update addresses the following: Adds enhanced Brightness Control Note: Software is not interchangeable between models. Please do not attempt this update on any other model then the J1CA9 Download File: J1CA9 Firmware Update How to Update:
    1. Download the firmware file from the link above.
    2. Unzip the downloaded file.
    3. Copy the 2 ISPBOOT.BIN files to an empty USB Thumb Drive formatted to FAT32.
    4. With the vehicle Off, insert the USB Thumb Drive with Update Firmware into the J1CA9 USB Port.
    5. Turn the vehicle On, the radio will boot up with the update screen.
    6. Once the update is complete, the radio will shut down and power back up.
    7. Remove the USB Thumb Drive from the unit.
    8. The update is now complete.
    To check that the update was done correctly, go to Settings and press Others and then press System Version. If you see the information listed below, the update was done correctly. - Version: J1CA9 V1.0 - Date: 20211109_1803 - SDK: 24.0.2.2.2.0.1.0 - Mcu: SP_A_2_20210108_01

Pass
13. Product: 10.1″ Multimedia Receiver with Apple CarPlay and Android Auto – CAR10
Product URL: https://jensenmobile.com/shop/multimedia/car10/
Firmware Links:
    CAR10 Firmware Update <!--Download the file: CAR10 Clock Fix and Home Screen Update Download the update procedures file: CAR10 Update Procedures Note: Software is not interchangeable between models. Please do not attempt this update on any other model then the CAR10. This update addresses the following: Fixes clock issue Adds date to home screen
    This update addresses the following: Improves the screen resolution while in Apple CarPlay or Android Auto Note: Software is not interchangeable between models. Please do not attempt this update on any other model then the CAR10 Download File: CAR10 Firmware Update How to Update:
    1. Download the firmware file from the link above.
    2. Unzip the downloaded file.
    3. Copy the 2 ISPBOOT.BIN files to an empty USB Thumb Drive formatted to FAT32.
    4. With the vehicle Off , insert the USB Thumb Drive with Update Firmware into the CAR10 USB Port.
    5. Turn the vehicle On, the radio will boot up with the update screen.
    6. Once the update is complete, the radio will shut down and power back up.
    7. Remove the USB Thumb Drive from the unit.
    8. The update is now complete.
    To check that the update was done correctly, goto Settings and press Others and then press System Version. If you see he below information, the update was done correctly. - Version: CAR10 V1.2 - Date: 20210617_1736 - SDK: 24.0.2.2.2.0.1.0
    --> This update addresses the following: • Adds Color Brightness Control to the Settings Menu • Fixes clock issue • Adds date to home screen • Improves the screen resolution while in Apple CarPlay or Android Auto Note: Software is not interchangeable between models. Please do not attempt this update on any other model then the CAR10 Download File: CAR10 Firmware Update How to Update:
    1. Download the firmware file from the link above.
    2. Unzip the downloaded file. (NOTE: To unzip the file, the program WINRAR is required and can be downloaded from this link: https://www.rarlab.com/download.htm)
    3. Copy the 2 ISPBOOT.BIN files to an empty USB Thumb Drive formatted to FAT32.
    4. With the vehicle Off, insert the USB Thumb Drive with Update Firmware into the CAR10 USB Port.
    5. Turn the vehicle On, the radio will boot up with the update screen.
    6. Once the update is complete, the radio will shut down and power back up.
    7. Remove the USB Thumb Drive from the unit.
    8. The update is now complete.
    To check that the update was done correctly, go to Settings and press Others and then press System Version. If you see the information listed below, the update was done correctly. - Version: CAR10 V1.2 - Date: 20210812_1554 - SDK: 24.0.2.2.2.0.1.0 - Mcu: SP_38_20190926_01

Pass
14. Product: 10.1″ Multimedia Receiver with Apple CarPlay and Android Auto – CAR1000
Product URL: https://jensenmobile.com/shop/multimedia/car1000/
Firmware Links:
    CAR1000 Firmware Update <!--Download the file: CAR1000 Clock Fix and Home Screen Update Download the update procedures file: CAR1000 Update Procedures Note: Software is not interchangeable between models. Please do not attempt this update on any other model then the CAR1000. This update addresses the following: Fixes clock issue Adds date to home screen
    This update addresses the following: Improves the screen resolution while in Apple CarPlay or Android Auto Note: Software is not interchangeable between models. Please do not attempt this update on any other model then the CAR1000 Download File: CAR1000 Firmware Update How to Update:
    1. Download the firmware file from the link above.
    2. Unzip the downloaded file.
    3. Copy the 2 ISPBOOT.BIN files to an empty USB Thumb Drive formatted to FAT32.
    4. With the vehicle Off , insert the USB Thumb Drive with Update Firmware into the CAR1000 USB Port.
    5. Turn the vehicle On, the radio will boot up with the update screen.
    6. Once the update is complete, the radio will shut down and power back up.
    7. Remove the USB Thumb Drive from the unit.
    8. The update is now complete.
    To check that the update was done correctly, goto Settings and press Others and then press System Version. If you see he below information, the update was done correctly. - Version: CAR1000 V1.2 - Date: 20210518_1041 - SDK: 24.0.2.2.2.0.1.0
    --> This update addresses the following: • Adds Color Brightness Control to the Settings Menu • Fixes clock issue • Adds date to home screen • Improves the screen resolution while in Apple CarPlay or Android Auto Note: Software is not interchangeable between models. Please do not attempt this update on any other model then the CAR1000 Download File: CAR1000 Firmware Update How to Update:
    1. Download the firmware file from the link above.
    2. Unzip the downloaded file. (NOTE: To unzip the file, the program WINRAR is required and can be downloaded from this link: https://www.rarlab.com/download.htm)
    3. Copy the 2 ISPBOOT.BIN files to an empty USB Thumb Drive formatted to FAT32.
    4. With the vehicle Off, insert the USB Thumb Drive with Update Firmware into the CAR1000 USB Port.
    5. Turn the vehicle On, the radio will boot up with the update screen.
    6. Once the update is complete, the radio will shut down and power back up.
    7. Remove the USB Thumb Drive from the unit.
    8. The update is now complete.
    To check that the update was done correctly, go to Settings and press Others and then press System Version. If you see the information below, the update was done correctly. - Version: CAR1000 V1.2 - Date: 20210811_1041 - SDK: 24.0.2.2.2.0.1.0 - Mcu:SP_38_20190926_01

Pass
15. Product: 6.8″ Receiver with Apple CarPlay and Android Auto – CAR68
Product URL: https://jensenmobile.com/shop/multimedia/car68/
Firmware Links:
    This update addresses the following: Setup Wizard Fix Updates so the setup wizard only needs to be done 1 time only after installation Download File: CAR68 Setup Wizard Fix Note: Software is not interchangeable between models. Please do not attempt this update on any other model then the CAR68. How to Update: 1. Download the firmware file from the link above. 2. Unzip the downloaded file. 3. Copy the ISPBOOT.BIN and the update folder to the empty USB Thumb Drive formatted to FAT32. 4. Insert the USB Thumb Drive with Update Firmware into the CAR68 USB Port. 5. After pressing the Home Icon, select the Setting Icon at the bottom right of the Home Screen. 6. Select ‘About’ from the Setting Menu. 7. Select ‘Software Update’ at the bottom of the menu. 8. Press ‘Update’ in the Pop Up window. 9. When the Firmware Update is completed, remove the USB Thumb Drive from the unit. 10. Press the Reset Button. This update addresses the following: Removes the yellow banner when in reverse backup camera mode Note: Software is not interchangeable between models. Please do not attempt this update on any other model then the CAR68. Download File 1: CAR68 Banner Fix Download the firmware instructions: CAR68 Firmware Instructions This update addresses the following: Updates the contact list downloading to the radio only 1 time Note: Software is not interchangeable between models. Please do not attempt this update on any other model then the CAR68. Download Firmware: CAR68 Contacts Fix How to Update: 1. Download the firmware file from the link above. 2. Unzip the downloaded file. 3. Copy the ISPBOOT.BIN and the update folder to the empty USB Thumb Drive formatted to FAT32. 4. Insert the USB Thumb Drive with Update Firmware into the CAR68 USB Port. 5. After pressing the Home Icon, select the Setting Icon at the bottom right of the Home Screen. 6. Select ‘About’ from the Setting Menu. 7. Select ‘Software Update’ at the bottom of the menu. 8. Press ‘Update’ in the Pop Up window. 9. When the Firmware Update is completed, remove the USB Thumb Drive from the unit. 10. Press the Reset Button. This update addresses the following: Adds USB track Up and track Down steering wheel controls when SWC module is connected. Note: Software is not interchangeable between models. Please do not attempt this update on any other model then the CAR68. Download Firmware: CAR68 SWC Update How to Update: 1. Download the firmware file from the link above. 2. Unzip the downloaded file. 3. Copy the 2 ISPBOOT.BIN files to an empty USB Thumb Drive formatted to FAT32. 4. With the vehicle Off , insert the USB Thumb Drive with Update Firmware into the CAR68 USB Port. 5. Turn the vehicle On, the radio will boot up with the update screen. 6. Once the update is complete, remove the USB thumb drive and turn the radio off and then back on so the firmware update is completed. 7. The update is now complete. 10. To check that the update was done correctly, goto Settings and press About. If you see he below information, the update was done correctly. - MCU: HJ1-ST02-200805 - SOC: HJ1-SC02-210731 - SDK: MJ2.2 25.0.0.6.1.0.1.0 - Hardware Version: 1.1.1 - Software Version: 2.0.2 - QR Code

Pass
16. Product: 6.8″ Receiver with Apple CarPlay and Android Auto – CAR689
Product URL: https://jensenmobile.com/shop/multimedia/car689/
Firmware Links:
    This update addresses the following: Setup Wizard Fix Updates so the setup wizard only needs to be done 1 time only after installation Download File: CAR689 Firmware Update Download the firmware instructions: CAR689 Firmware Instructions Note: Software is not interchangeable between models. Please do not attempt this update on any other model then the CAR689.   This update addresses the following: Updates the contact list downloading to the radio only 1 time Note: Software is not interchangeable between models. Please do not attempt this update on any other model then the CAR689. Download Firmware: Contacts Fix How to Update: 1. Download the firmware file from the link above. 2. Unzip the downloaded file. 3. Copy the ISPBOOT.BIN and the update folder to the empty USB Thumb Drive formatted to FAT32. 4. Insert the USB Thumb Drive with Update Firmware into the CAR68 USB Port. 5. After pressing the Home Icon, select the Setting Icon at the bottom right of the Home Screen. 6. Select ‘About’ from the Setting Menu. 7. Select ‘Software Update’ at the bottom of the menu. 8. Press ‘Update’ in the Pop Up window. 9. When the Firmware Update is completed, remove the USB Thumb Drive from the unit. 10. Press the Reset Button.   This update addresses the following: Adds USB track Up and track Down steering wheel controls when SWC module is connected. Note: Software is not interchangeable between models. Please do not attempt this update on any other model then the CAR689. Download Firmware: CAR689 SWC Update How to Update: 1. Download the firmware file from the link above. 2. Unzip the downloaded file. 3. Copy the 2 ISPBOOT.BIN files to an empty USB Thumb Drive formatted to FAT32. 4. With the vehicle Off , insert the USB Thumb Drive with Update Firmware into the CAR689 USB Port. 5. Turn the vehicle On, the radio will boot up with the update screen. 6. Once the update is complete, remove the USB thumb drive and turn the radio off and then back on so the firmware update is completed. 7. The update is now complete.

Pass
17. Product: 7″ Multimedia Receiver with Apple CarPlay and Android – CAR70V
Product URL: https://jensenmobile.com/shop/multimedia/car70v/
Firmware Links:
    Firmware Update Download the file: CAR70V Clock Fix and Home Screen Update Download the update procedures file: CAR70V Update Procedures Note: Software is not interchangeable between models. Please do not attempt this update on any other model then the CAR70V. This update addresses the following:
    • Fixes clock issue
    • Adds date to home screen
    • Adjusts the Source volume settings during vehicle startup
    This update addresses the following: Improves the screen resolution while in Apple CarPlay or Android Auto Note: Software is not interchangeable between models. Please do not attempt this update on any other model then the CAR70V Download File: CAR70V Firmware Update How to Update: 1. Download the firmware file from the link above. 2. Unzip the downloaded file. 3. Copy the 2 ISPBOOT.BIN files to an empty USB Thumb Drive formatted to FAT32. 4. With the vehicle Off , insert the USB Thumb Drive with Update Firmware into the CAR70V USB Port. 5. Turn the vehicle On, the radio will boot up with the update screen. 6. Once the update is complete, the radio will shut down and power back up. 7. Remove the USB Thumb Drive from the unit. 8. The update is now complete. To check that the update was done correctly, goto Settings and press Others and then press System Version. If you see he below information, the update was done correctly. - Version: CAR70V V1.2 - Date: 20210617_1729 - SDK: 24.0.2.2.2.0.1.0

Pass
18. Product: 10.1″ Multimedia Receiver with USB Screen Mirroring – CMM10
Product URL: https://jensenmobile.com/shop/multimedia/cmm10/
Firmware Links:
    This update addresses the following: Parking Brake Fix Updates the USB Mirroring feature to not work without the parking brake wire engaged Note: There are 2 files to this firmware and both parts are required to complete the update. Download File 1: CMM10 Parking Brake Fix (part 1) Download File 2: CMM10 Parking Brake Fix (part 2) Download the firmware instructions: CMM10 Firmware Instructions Note: Software is not interchangeable between models. Please do not attempt this update on any other model then the CMM10. This update addresses the following: USB Mirroring Fix Improves phone compatibility issues when using the USB Mirroring feature Download File 1: CMM10 USB Mirroring Fix Download the firmware instructions: CMM10 Firmware Instructions

Pass
19. Product: 10.1″ Multimedia Receiver with USB Screen Mirroring – CMM710
Product URL: https://jensenmobile.com/shop/multimedia/cmm710/
Firmware Links:
    This update addresses the following: Parking Brake Fix and EQ Settings Fix Updates the USB Mirroring feature to not work without the parking brake wire engaged Fixes the "USER" EQ setting to save when the car is turned off Note: There are 2 files to this firmware and both parts are required to complete the update Download File 1: CMM710 Parking Brake and EQ Fix (part 1) Download File 2: CMM710 Parking Brake and EQ Fix (part 2) Download the firmware instructions: CMM710 Firmware Instructions Note: Software is not interchangeable between models. Please do not attempt this update on any other model then the CMM710.   This update addresses the following: USB Mirroring Fix Improves phone compatibility issues when using the USB Mirroring feature Download File 1: CMM710 USB Mirroring Fix Download the firmware instructions: CMM710 Firmware Instructions

Pass
20. Product: 7″ Multimedia Receiver with USB Screen Mirroring – CMM720
Product URL: https://jensenmobile.com/shop/multimedia/cmm720/
Firmware Links:
    This update addresses the following: Parking Brake Fix Updates the USB Mirroring feature to not work without the parking brake wire engaged Note: There are 2 files to this firmware and both parts are required to complete the update. Download File 1: CMM720 Parking Brake Fix (part 1) Download File 2: CMM720 Parking Brake Fix (part 2) Download the firmware instructions: CMM720 Firmware Instructions Note: Software is not interchangeable between models. Please do not attempt this update on any other model then the CMM720.   This update addresses the following: USB Mirroring Fix Improves phone compatibility issues when using the USB Mirroring feature Download File: CMM720 USB Mirroring Fix Download the firmware instructions: CMM720 Firmware Instructions   This update fixes a volume issue when turned to 0 after the car is shut off Fixes an issue of the volume not staying at 0 when the car is shut off and then started back up again Download File 1: CMM720 CPU Fix Download File 2: CMM720 MCU Fix Download the firmware instructions: CMM720 Firmware Instructions

Pass
21. Product: 7″ Media Receiver with USB Screen Mirroring – CMM7720
Product URL: https://jensenmobile.com/shop/multimedia/cmm7720/
Firmware Links:
    This update addresses the following: Parking Brake Fix, AM/FM Tuner Fading Issue and EQ Settings Fix Updates the USB Mirroring feature to not work without the parking brake wire engaged Fixes the "USER" EQ setting to save when the car is turned off

    Fixes the AM/FM tuner fading in and out issue

    Note: There are 2 files to this firmware and both parts are required to complete the update. Download File 1: CMM7720 Update Part 1 Download File 2: CMM7720 Update Part 2 Download the firmware instructions: CMM7720 Firmware Instructions Note: Software is not interchangeable between models. Please do not attempt this update on any other model then the CMM7720. This update addresses the following: USB Mirroring Fix Improves phone compatibility issues when using the USB Mirroring feature Download File 1: CMM7720 USB Mirroring Fix Download the firmware instructions: CMM7720 Firmware Instructions

Pass
22. Product: 6.2″ DVD Receiver with Bluetooth – VX2529
Product URL: https://jensenmobile.com/shop/multimedia/vx2529/
Firmware Links:
    Download the file: VX2529 J-Link App Feature On/Off Control Note: Software is not interchangeable between models. Please do not attempt this update on any other model then the VX2529. How to update: 1. Unzip the file 2. Copy all file into the USB thumb drive. 3. Power on the Head unit. 4. Insert the USB thumb drive in USB port. 5. "Are you sure" message will pop-up on screen. Press the green check mark to continue. This update addresses the following: Allows the J-Link App feature to be turned on and off from the settings menu

Pass
23. Product: 7″ CD/DVD Receiver with Built-In Bluetooth – VX3012
Product URL: https://jensenmobile.com/shop/multimedia/vx3012/
Firmware Links:
    <!--Updating the VX3012 Download the file: VX3012.1001.zip Notes: Software is not interchangeable between models. This update is for the head unit OS only. Items addressed with this update 3012.1001: 1. SWC updated to pre-defined PAC protocol. SWC learning capability disabled. A third-party SWC adapter must be used to interface the VX3012 to OE SWC functions such as the PAC SWI-RC (Recommended). 2. Default Turn-On Volume is set to level 7 (Previously set to higher level and was too loud). Updating via USB Stick Unzip/Uncompress the software update folder. Place the eight update files into the ROOT directory of the USB stick. Note: When updating the unit, make certain that power is not interrupted while the update is in progress. If power is lost or interrupted the unit may become inoperable. Also, before starting the update, turn-off Demo Mode in the Main Settings Menu. Note: This VX3012 update contains MPEG, MCU and TFT software. Power up the unit and insert the USB drive into the front USB port.
    1. After a few moments a menu will pop up and look like the following example: UPGRADE SYSTEM [MPEG TFT MCU]
    2. Press TFT Upgrade and another page will be displayed. Press “Upgrade” and the TFT update will begin. “TFT Erasing” will be shown on the display and you will see a progress bar indicating the process percentage.
    3. After the erase procedure, “TFT Upgrading” will be shown on the display and you will see a progress bar indicating the process percentage.
    4. After the TFT update, the unit will reboot and go to the Radio source (All settings will have been reset to factory default).
    5. Go to the Main Source Menu and select USB. A menu will pop up and display the Upgrade System Menu.
    6. Press MPEG and the update will begin. Upgrading MPEG will be shown on the display. If you do not press MPEG to begin the update, the update will automatically begin in 30 ~ 60 seconds. When the update is in process, do not remove the USB drive or attempt to turn OFF the unit. If the update begins automatically, let the update complete. Do not interrupt the update process.
    7. After the MPEG update, the unit will return to the Upgrade System Menu.
    8. Press MCU Upgrade and another page will be displayed. Press “Upgrade” and the MCU update will begin. Upgrading MCU will be shown on the display and you will see a progress bar showing the process percentage.
    9. After the MCU update, the unit will reboot and go to the Radio source (All settings will have been reset to factory default).
    10. Remove the USB drive.
    11. Go to the Settings Menu > DVD Tab > Version Info > Enter >
    12. Verify below software version: Software Version Verification MPEG Version: v0.78 MPEG Date: 150227 MCU Version: v0.80 MCU Date: 20150703 TFT Version: v000.018
    -->

Pass
24. Product: 7″ CD/DVD Receiver with Built-In Bluetooth – VX3014
Product URL: https://jensenmobile.com/shop/multimedia/vx3014/
Firmware Links:
    VX3014 Update Instructions Download the file: VX3014.1001.zip Note: Software is not interchangeable between models. This update is for the head unit OS only. Items addressed with this update 3014.1001:
    1. Compatibility with some USB flash memory drives.
    2. Compatibility with some CD-RW's when burned.
    3. Pandora relative volume level was not working correctly.
    4. EQ updated with +/- adjustment softkeys.
    Updating via USB Stick Unzip/Uncompress the software update folder. Place the two update files into the ROOT directory of the USB stick. Note: When updating the unit, make certain that power is not interrupted while the update is in progress. If power is lost or interrupted the unit may become inoperable. Also, before starting the update, turn-off Demo Mode in the Main Settings Menu. Note: This VX3014 update contains MPEG and MCU software. Power up the unit and insert the USB drive into the front USB port.
    1. After a few moments a menu will pop up and look like the following example: UPGRADE SYSTEM [MPEG MCU]
    2. Press MPEG and the update will begin. Upgrading MPEG will be shown on the display. If you do not press MPEG to begin the update, the update will automatically begin in 30 ~ 60 seconds. When the update is in process, do not remove the USB drive or attempt to turn OFF the unit. If the update begins automatically, let the update complete. Do not interrupt the update process.
    3. After the MPEG update, the unit will return to the Upgrade System Menu.
    4. Press MCU Upgrade and another page will be displayed. Press “Upgrade” and the MCU update will begin. Upgrading MCU will be shown on the display and you will see a progress bar showing the process percentage.
    5. After the MCU update, the unit will reboot and go to the Radio source (All settings will have been reset to factory default).
    6. Remove the USB drive.
    7. Go to the Settings Menu > Video Tab > Version Info > Enter >
    8. Verify below software version: Software Version Verification MPEG Version: v0.27-20160428 MCU Version: v0.57-20160303

Pass
25. Product: 6.2″ Multimedia DVD Receiver with Navigation – VX7528
Product URL: https://jensenmobile.com/shop/multimedia/vx7528/
Firmware Links:
    VX7528 Update Instructions Download the file: VX7528 Update Instructions VX7528 Firmware Update Download the file: VX7528 GPS Audio Fix Note: Software is not interchangeable between models. Please do not attempt this update on any other model then the VX7528. This update addresses the following: No source audio adjustment while in Navigation mode caused by a Y2k-Type bug.

Pass
26. Product: 6.2″ CD/DVD Receiver with Built-In Bluetooth – VX3022
Product URL: https://jensenmobile.com/shop/multimedia/vx3022/
Firmware Links:

    VX3022 Update Instructions
    Download the file: VX3022.1001.zip

    Note: Software is not interchangeable between models. This update is for the head unit OS only.

    • Items addressed with this update 3022.1001:
      SWC updated to pre-defined PAC protocol. SWC learning capability disabled. A third-party SWC adapter must be used to interface the VX3022 to OE SWC functions such as the PAC SWI-RC (Recommended).
    • Default Turn-On Volume is set to level 7 (Previously set to higher level and was too loud).

    Updating via USB Stick
    Unzip/Uncompress the software update folder. Place the eight update files into the ROOT directory of the USB stick. See below image for reference.

    Note: When updating the unit, make certain that power is not interrupted while the update is in progress. If power is lost or interrupted the unit may become inoperable. Also, before starting the update, turn-off Demo Mode in the Main Settings Menu.

    Note: This VX3022 update contains MPEG, MCU and TFT software.

    Power up the unit and insert the USB drive into the front USB port.

    1. After a few moments a menu will pop up and look like the following example: UPGRADE SYSTEM [MPEG TFT MCU]
    2. Press TFT Upgrade and another page will be displayed. Press “Upgrade” and the TFT update will begin. “TFT Erasing” will be shown on the display and you will see a progress bar indicating the process percentage.
    3. After the erase procedure, “TFT Upgrading” will be shown on the display and you will see a progress bar indicating the process percentage.
    4. After the TFT update, the unit will reboot and go to the Radio source (All settings will have been reset to factory default).
    5. Go to the Main Source Menu and select USB. A menu will pop up and display the Upgrade System Menu.
    6. Press MPEG and the update will begin. Upgrading MPEG will be shown on the display. If you do not press MPEG to begin the update, the update will automatically begin in 30 ~ 60 seconds. When the update is in process, do not remove the USB drive or attempt to turn OFF the unit. If the update begins automatically, let the update complete. Do not interrupt the update process.
    7. After the MPEG update, the unit will return to the Upgrade System Menu.
    8. Press MCU Upgrade and another page will be displayed. Press “Upgrade” and the MCU update will begin. Upgrading MCU will be shown on the display and you will see a progress bar showing the process percentage.
    9. After the MCU update, the unit will reboot and go to the Radio source (All settings will have been reset to factory default).
    10. Remove the USB drive.
    11. Go to the Settings Menu > DVD Tab > Version Info > Enter >
    12. Verify below software version:
      Software Version Verification
      MPEG Version: v0.78
      MPEG Date: 150227
      MCU Version: v0.80
      MCU Date: 20150703
      TFT Version: v000.018

Pass
27. Product: 6.2″ Mechless Receiver with Navigation – VX7228
Product URL: https://jensenmobile.com/shop/multimedia/vx7228/
Firmware Links:
    VX7228 Update Instructions Download the file: VX7228 Update Instructions VX7228 Firmware Update Download the file: VX7228 GPS Audio Fix Note: Software is not interchangeable between models. Please do not attempt this update on any other model then the VX7228. This update addresses the following: No source audio adjustment while in Navigation mode caused by a Y2k-Type bug

Pass
28. Product: 6.2″ CD/DVD Receiver with Built-In Bluetooth – VX3024
Product URL: https://jensenmobile.com/shop/multimedia/vx3024/
Firmware Links:
    VX3024 Update Instructions Download the file: VX3024.1001.zip Note: Software is not interchangeable between models. This update is for the head unit OS only. Items addressed with this update 3024.1001:
    1. Compatibility with some USB flash memory drives.
    2. Compatibility with some CD-RW's when burned.
    3. Pandora relative volume level was not working correctly.
    4. EQ updated with +/- adjustment softkeys.
    Updating via USB Stick Unzip/Uncompress the software update folder. Place the two update files into the ROOT directory of the USB stick. See below image for reference. Note: When updating the unit, make certain that power is not interrupted while the update is in progress. If power is lost or interrupted the unit may become inoperable. Also, before starting the update, turn-off Demo Mode in the Main Settings Menu. Note: This VX3024 update contains MPEG and MCU software. Power up the unit and insert the USB drive into the front USB port.
    1. After a few moments a menu will pop up and look like the following example: UPGRADE SYSTEM [MPEG MCU]
    2. Press MPEG and the update will begin. Upgrading MPEG will be shown on the display. If you do not press MPEG to begin the update, the update will automatically begin in 30 ~ 60 seconds. When the update is in process, do not remove the USB drive or attempt to turn OFF the unit. If the update begins automatically, let the update complete. Do not interrupt the update process.
    3. After the MPEG update, the unit will return to the Upgrade System Menu.
    4. Press MCU Upgrade and another page will be displayed. Press “Upgrade” and the MCU update will begin. Upgrading MCU will be shown on the display and you will see a progress bar showing the process percentage.
    5. After the MCU update, the unit will reboot and go to the Radio source (All settings will have been reset to factory default).
    6. Remove the USB drive.
    7. Go to the Settings Menu > Video Tab > Version Info > Enter >
    8. Verify below software version: Software Version Verification MPEG Version: v0.27-20160428 MCU Version: v0.57-20160303

Pass
29. Product: 6.2″ CD/DVD Receiver with Built-In Navigation and Bluetooth – VX7021
Product URL: https://jensenmobile.com/shop/multimedia/vx7021/
Firmware Links:
    VX7021 Update Instructions Download the file: VX7021.1004.zip Note: Software is not interchangeable between models. This update is for the head unit systems only. This update is not a navigation update. This update addresses the following item:
    1. Bluetooth ringtone volume reduced.
    2. Apple / MFi software updated.
    Preparing the MicroSD card Note: microSD card should be formatted FAT32 before the update procedure. Use a 4GB or 8GB MicroSD card. Unzip the software update folder. Place the update files into the ROOT directory of a blank microSD card. There should be no folders on the microSD card except the folder contained within the update files. Beginning the Update Note: When updating the unit, make certain that power is not interrupted while the update is in progress. If power is lost or interrupted the unit may become inoperable. Also, before starting the update, turn-off Demo Mode in the “Settings Menu” (Go to the Settings Menu > General > Demo Mode > OFF). Note: This update must be loaded two times due to memory architecture changes and previous software versions.
    1. Ensure head unit is OFF.
    2. Remove the navigation microSD card from the unit and set aside. Do not modify or delete any files on the factory navigation microSD card. Insert the microSD card with the update files into the microSD card slot.
    3. Power the unit ON.
    4. The update process will begin automatically upon power up.
    5. After a few moments, a TFT calibration screen will display on the TFT.
    6. Press and hold the “cross hair” with your index finger until it moves to the next calibration sector.
    7. After you press and hold top right-hand corner for calibration, the screen will ask you to “tap” the TFT again to save the settings. Tap the TFT.
    8. After the next update section, a display prompt will ask you to remove the microSD card. Remove the card.
    9. The update will continue and the unit will reboot and may display a red line.
    10. Insert the update microSD card again, push the reset button (You may have to push the volume control to turn the unit ON) and update the unit a second time.
    11. Updates are now complete.
    12. Re-insert the navigation microSD card.
    13. Go to the Settings Menu > General > Demo Mode > OFF.
    14. Go to the Settings Menu > Version.
    15. Check version installed to ensure the update was successful. Software Version Verification (7021.1004) Model: VX7021 MCU: v1.92 Feb 2 2016 MPEG: 01130902 SERV: 9b0f0060 BT: 7.10 MPU: 1C6.166.v1.04_170823 OS: v2.03-06 2016-11-30

Pass
30. Product: 6.2″ CD/DVD Receiver with Built-In Navigation – VX7022
Product URL: https://jensenmobile.com/shop/multimedia/vx7022/
Firmware Links:
    VX7022 Update Instructions Download the file: VX7022.1003.zip Note: These update instructions are only a general guide. Each model will have its own software update version. Software is not interchangeable between models. This update is for the head unit OS only. This update is not a navigation update. Items addressed with this update 7022.1003:
    1. SWC updated to pre-defined PAC protocol. SWC learning capability disabled. A third-party SWC adapter must be used to interface the VX7022 to OE SWC functions.
    2. Bluetooth ring volume was too loud and not adjustable with the volume setting. Bluetooth ring volume is now adjustable.
    3. Default Turn-On Volume is set to level 7 (Previously set to higher level and was too loud).
    Preparing the MicroSD card Note: MicroSD card should be formatted FAT32 before update procedure. Use a 4GB or 8GB MicroSD card. Unzip the software update folder. Place the update files into the ROOT directory of a blank MicroSD card. There should be no folders on the MicroSD card except the folder contained within the update files. See below image for reference. Beginning the Update Note: When updating the unit, make certain that power is not interrupted while the update is in progress. If power is lost or interrupted the unit may become inoperable. Also, before starting the update, turn-off Demo Mode in the “Settings Menu” (Go to the Settings Menu > General > Demo Mode > OFF).
    1. Before starting the update, ensure the VX7022 is OFF (Press and hold the volume control). Once the VX7022 is OFF, turn the vehicle ignition OFF.
    2. Remove the navigation MicroSD card from the unit and set aside. Do not modify or delete any files on the factory navigation MicroSD card. Insert the MicroSD card with the update files into the MicroSD card slot.
    3. Turn ON the vehicle ignition. Press the “Reset” button under the volume control with a pen tip or similar object.
    4. The update process will begin automatically upon power up.
    5. After a few moments, a TFT calibration screen will display on the TFT.
    6. Press and hold the “cross hair” with your index finger until it moves to the next calibration sector.
    7. After you press and hold top right-hand corner for calibration, the screen will ask you to “tap” the TFT again to save the settings. Tap the TFT.
    8. After the next update section, a display prompt will ask you to remove the MicroSD card. Remove the card.
    9. The update will continue and the unit will reboot.
    10. Go to the Settings Menu > Version. Check the version installed with the below parameters in ensure the update was successful.

    Software Version Verification

    Model: VX7022 MCU: v1.73 Mar 30 2016 MPEG: 01130902 Servo: 9b0f0060 BT: 7.7 MPU: 1AR.166.V1.27_161028 OS: v2.03-06-11 2016-03-30


Pass
31. Product: 6.2″ CD/DVD Receiver with Built-In Navigation and Bluetooth – VX7020
Product URL: https://jensenmobile.com/shop/multimedia/vx7020/
Firmware Links:
    VX7020.1003 Update Instructions Download the file: VX7020.1003.zip Using This Software Update This software update disables the learning ability of the built-in SWC interface in early production VX7020’s. Use this software if your SWC controls will not program correctly with your vehicle make and model. After using this update, you will need to purchase a third-party SWC adapter. See item 1 below. Note: Software is not interchangeable between models. This update is for the head unit systems only. This update is not a navigation update. This update addresses the following items:
    1. Pandora / Bluetooth / Samsung issue. When certain Android Samsung phones are connected via Bluetooth and Pandora is playing, when a call comes in, the unit may lock-up and freeze.
    Previous items addressed by this update:
    1. SWC updated to pre-defined PAC protocol. SWC learning capability disabled. A third-party adapter (Such as the PAC SWI-RC) must be used after this update in order to interface the VX7020 to an OE steering wheel with function controls.
    2. Adds programmable Turn-On volume. To access function, rotate rotary encoder to the desired Turn-On volume. While the green volume bar is displayed, press and hold the rotary encoder for 2 seconds.
    3. Corrected Bluetooth / Back-Up camera issue. Condition: Back-Up camera is installed and backing up while on a BT call. When the vehicle is placed in “drive”, the BT call will transfer to the phone.
    4. Added Back-Up camera image compensation – Normal / Mirror Image.
    5. Keyless Disc Eject. To access function, when vehicle is OFF (Key out of the ignition), press the Eject button momentarily.
    6. Pandora icon moved to 1st page of Main Source Menu.
    7. Volume can be adjusted when back-up camera is active.
    Preparing the MicroSD card Note: microSD card should be formatted FAT32 before the update procedure. Use a 4GB or 8GB MicroSD card. Unzip the software update folder. Place the update files into the ROOT directory of a blank microSD card. There should be no folders on the microSD card except the folder contained within the update files. See below image for reference. Beginning the Update Note: When updating the unit, make certain that power is not interrupted while the update is in progress. If power is lost or interrupted the unit may become inoperable. Also, before starting the update, turn-off Demo Mode in the “Settings Menu” (Go to the Settings Menu > General > Demo Mode > OFF). Note: This update must be loaded two times due to memory architecture changes and previous software versions.
    1. Ensure head unit is OFF.
    2. Remove the navigation microSD card from the unit and set aside. Do not modify or delete any files on the factory navigation microSD card. Insert the microSD card with the update files into the microSD card slot.
    3. Power the unit ON.
    4. The update process will begin automatically upon power up.
    5. After a few moments, a TFT calibration screen will display on the TFT.
    6. Press and hold the “cross hair” with your index finger until it moves to the next calibration sector.
    7. After you press and hold top right-hand corner for calibration, the screen will ask you to “tap” the TFT again to save the settings. Tap the TFT.
    8. After the next update section, a display prompt will ask you to remove the microSD card. Remove the card.
    9. The update will continue and the unit will reboot and display a red line.
    10. Insert the update microSD card again, push the reset button (You may have to push the volume control to turn the unit ON) and update the unit a second time.
    11. Updates are now complete.
    12. Re-insert the navigation microSD card.
    13. Go to the Settings Menu > General > Demo Mode > OFF.
    14. Go to the Settings Menu > Version.
    15. Check version installed to ensure the update was successful. Software Version Verification (7020.1003) Model: VX7020 MCU: v1.94 June 14 2016 MPEG: 01130902 SERV: 9b0f0060 BT: 7.7 MPU: 136.166.v1.21_160817 OS: v2.03-06 2016-08-15

Pass
32. Product: 6.2″ DVD Receiver with Navigation – VX7020N
Product URL: https://jensenmobile.com/shop/multimedia/vx7020n/
Firmware Links:
    VX7020N Update Instructions Download the file: VX7020N Update Instructions VX7020N Firmware Update Download the file: VX7020N GPS Audio Fix Note: Software is not interchangeable between models. Please do not attempt this update on any other model then the VX7020N. This update addresses the following: No source audio adjustment while in Navigation mode caused by a Y2k-Type bug

Pass
33. Product: 7″ CD/DVD Receiver with Built-In Navigation – VX7012
Product URL: https://jensenmobile.com/shop/multimedia/vx7012/
Firmware Links:

Pass
34. Product: 7″ Multimedia Receiver with Apple CarPlay and Navigation – VX7014
Product URL: https://jensenmobile.com/shop/multimedia/vx7014/
Firmware Links:

Pass
35. Product: 7″ CD/DVD Receiver with Bluetooth – VX4012
Product URL: https://jensenmobile.com/shop/multimedia/vx4012/
Firmware Links:
    <!--VX4012 Update Instructions Download the file: VX4012.1001.zip Note: Software is not interchangeable between models. This update is for the head unit OS only. Items addressed with this update 4012.1001:
    1. SWC updated to pre-defined PAC protocol. SWC learning capability disabled. A third-party SWC adapter must be used to interface the VX4012 to OE SWC functions such as the PAC SWI-RC (Recommended).
    2. Bluetooth updated to v7.7.
    3. Default Turn-On Volume is set to level 7 (Previously set to higher level and was too loud).
    Preparing the MicroSD card Note: MicroSD card should be formatted FAT32 before update procedure. Use a 4GB or 8GB MicroSD card. Unzip/Uncompress the software update folder. Place the update files into the ROOT directory of a blank MicroSD card. There should be no folders on the MicroSD card except the folder contained within the update files. See below image for reference. Beginning the Update Note: When updating the unit, make certain that power is not interrupted while the update is in progress. If power is lost or interrupted the unit may become inoperable. Also, before starting the update, turn-off Demo Mode in the “Settings Menu” (Go to the Settings Menu > General > Demo Mode > OFF).
    1. Insert the MicroSD card with the update files into the MicroSD card slot.
    2. Power the unit ON.
    3. The update process will begin automatically upon power up.
    4. After a few moments, a TFT calibration screen will display on the TFT.
    5. Press and hold the “cross hair” with your index finger until it moves to the next calibration sector.
    6. After you press and hold top right-hand corner for calibration, the screen will ask you to “tap” the TFT again to save the settings. Tap the TFT.
    7. After the next update section, a display prompt will ask you to remove the MicroSD card. Remove the card.
    8. The update will continue and the unit will reboot.
    9. Go to the Settings Menu > Version. Check the version installed with the below parameters in ensure the update was successful. Software Version Verification Model: VX4012 MCU: v3.44 Aug 24 2015 MPEG: 01140522 SERV: 9b150060 BT: 7.7 MPU: 601.166.v1.23_150824 OS: v2.03-07-10 2015-07-13
    -->

Pass
36. Product: 7″ CD/DVD Receiver with Apple CarPlay – VX4014
Product URL: https://jensenmobile.com/shop/multimedia/vx4014/
Firmware Links:

Pass
37. Product: 6.2″ CD/DVD Receiver with Built-In Bluetooth – VX4022
Product URL: https://jensenmobile.com/shop/multimedia/vx4022/
Firmware Links:
    VX4022 Update Instructions Download the file: VX4022.1001.zip Note: Software is not interchangeable between models. This update is for the head unit OS only. Items addressed with this update 4022.1001:
    1. SWC updated to pre-defined PAC protocol. SWC learning capability disabled. A third-party SWC adapter must be used to interface the VX4022 to OE SWC functions such as the PAC SWI-RC (Recommended).
    2. Bluetooth updated to v7.7.
    3. Default Turn-On Volume is set to level 7 (Previously set to higher level and was too loud).
    Preparing the MicroSD card Note: MicroSD card should be formatted FAT32 before update procedure. Use a 4GB or 8GB MicroSD card. Unzip/Uncompress the software update folder. Place the update files into the ROOT directory of a blank MicroSD card. There should be no folders on the MicroSD card except the folder contained within the update files. See below image for reference. Beginning the Update Note: When updating the unit, make certain that power is not interrupted while the update is in progress. If power is lost or interrupted the unit may become inoperable. Also, before starting the update, turn-off Demo Mode in the “Settings Menu” (Go to the Settings Menu > General > Demo Mode > OFF).
    1. Insert the MicroSD card with the update files into the MicroSD card slot.
    2. Power the unit ON.
    3. The update process will begin automatically upon power up.
    4. After a few moments, a TFT calibration screen will display on the TFT.
    5. Press and hold the “cross hair” with your index finger until it moves to the next calibration sector.
    6. After you press and hold top right-hand corner for calibration, the screen will ask you to “tap” the TFT again to save the settings. Tap the TFT.
    7. After the next update section, a display prompt will ask you to remove the MicroSD card. Remove the card.
    8. The update will continue and the unit will reboot.
    9. Go to the Settings Menu > Version. Check the version installed with the below parameters in ensure the update was successful. Software Version Verification Model: VX4022 MCU: v3.58 Aug 12 2015 MPEG: 01130902 SERV: 9b0f0060 BT: 7.7 MPU: 504.166.v1.23_150824 OS: v2.03-06-11 2015-06-16

Pass
38. Product: 8″ Media Receiver with Wireless Android Auto & Apple Carplay – J1CA8FL
Product URL: https://jensenmobile.com/shop/multimedia/j1ca8fl/
Firmware Links:

    Firmware Update Instructions

    This update addresses the following:
    • Improved touchscreen response time.
    • Change the Safety Notice screen to disappear automatically after 2 seconds.
    • Change Rear Camera View settings from on to off (default: OFF).
    • Add Time Sync Settings - OFF/GPS/RDS/Phone (default: OFF).
    Note: Software is not interchangeable between models. Please do not attempt this update on any model other than the J1CA8FL.

    How to Update:

    1. Download the firmware file from the link below.
    2. Unzip the downloaded file. Note: To unzip the file, the program WINRAR is required and can be downloaded from this link: WINRAR Download
    3. Copy the ISPBOOT.BIN file to an empty USB Thumb Drive formatted to FAT32.
    4. Insert the USB Thumb Drive with Update Firmware into the J1CA8FL USB/Charging Port.
    5. Navigate to Settings and scroll till you get to the About button on the left side of the menu.
    6. Press the About button and you will see on the right-hand side Software Update.
    7. Press Software Update and you will see the Update button. Press Update to begin the firmware upgrade.
    8. Once the update is complete, remove the USB thumb drive.
    9. The update is now complete.
    Download Firmware Zipped File: J1CA8FL Firmware Download To check that the update was done correctly, go to Settings and press Others and then press System Version. If you see the following information, the update was done correctly for model J1CA8FL. – Version: 2.0.3 – Date: 20240311 – SDK: MJ2.2 54.0.20.0.2.6.1.0 – MCU: GD72-230712

Pass
39. Product: 10.1″ Media Receiver with Wireless Android Auto & Apple CarPlay – J1CA10FL
Product URL: https://jensenmobile.com/shop/multimedia/j1ca10fl/
Firmware Links:

    Firmware Update Instructions

    This update addresses the following:

    • Improved touchscreen response time.
    • Change the Safety Notice screen to disappear automatically after 2 seconds.
    • Change Rear Camera View settings from on to off (default: OFF).
    • Add Time Sync Settings - OFF/GPS/RDS/Phone (default: OFF).

    Note: Software is not interchangeable between models. Please do not attempt this update on any model other than the J1CA10FL.

    How to Update:

    1. Download the firmware file from the link below.
    2. Unzip the downloaded file. Note: To unzip the file, the program WINRAR is required and can be downloaded from this link: WINRAR Download
    3. Copy the ISPBOOT.BIN file to an empty USB Thumb Drive formatted to FAT32.
    4. Insert the USB Thumb Drive with Update Firmware into the J1CA10FL USB/Charging Port.
    5. Navigate to Settings and scroll till you get to the About button on the left side of the menu.
    6. Press the About button and you will see on the right-hand side Software Update.
    7. Press Software Update and you will see the Update button. Press Update to begin the firmware upgrade.
    8. Once the update is complete, remove the USB thumb drive.
    9. The update is now complete.

    Download Firmware Zipped File: J1CA10FL Firmware Download

    To check that the update was done correctly, go to Settings and press Others and then press System Version. If you see the following information, the update was done correctly for model J1CA10FL. – Version: 2.0.3 – Date: 20240311 – SDK: MJ2.2 54.0.20.0.2.6.1.0 – MCU: GD72-230712

Pass
40. Product: 10.1″ Receiver with Wireless Android Auto & Apple CarPlay – CAR1013
Product URL: https://jensenmobile.com/shop/multimedia/car1013/
Firmware Links:

    Firmware Update Instructions

    This update addresses the following:
    • Improved touchscreen response time.
    • Change the Safety Notice screen to disappear automatically after 2 seconds.
    • Change Rear Camera View settings from on to off (default: OFF).
    • Add Time Sync Settings - OFF/GPS/RDS/Phone (default: OFF).
    Note: Software is not interchangeable between models. Please do not attempt this update on any model other than the CAR1013.

    How to Update:

    1. Download the firmware file from the link below.
    2. Unzip the downloaded file. Note: To unzip the file, the program WINRAR is required and can be downloaded from this link: WINRAR Download
    3. Copy the ISPBOOT.BIN file to an empty USB Thumb Drive formatted to FAT32.
    4. Insert the USB Thumb Drive with Update Firmware into the CAR1013 USB/Charging Port.
    5. Navigate to Settings and scroll till you get to the About button on the left side of the menu.
    6. Press the About button and you will see on the right-hand side Software Update.
    7. Press Software Update and you will see the Update button. Press Update to begin the firmware upgrade.
    8. Once the update is complete, remove the USB thumb drive.
    9. The update is now complete.
    Download Firmware Zipped File: CAR1013 Firmware Download To check that the update was done correctly, go to Settings and press Others and then press System Version. If you see the following information, the update was done correctly for model CAR1013. – Version: 2.0.3 – Date: 20240311 – SDK: MJ2.2 54.0.20.0.2.6.1.0 – MCU: GD72-230712

Pass
41. Product: 8” Receiver with Wireless Android Auto & Apple CarPlay – CAR813
Product URL: https://jensenmobile.com/shop/multimedia/car813/
Firmware Links:

    Firmware Update Instructions

    This update addresses the following:

    • Improved touchscreen response time.
    • Change the Safety Notice screen to disappear automatically after 2 seconds.
    • Change Rear Camera View settings from on to off (default: OFF).
    • Add Time Sync Settings - OFF/GPS/RDS/Phone (default: OFF).

    Note: Software is not interchangeable between models. Please do not attempt this update on any model other than the CAR813.

    How to Update:

    1. Download the firmware file from the link below.
    2. Unzip the downloaded file. Note: To unzip the file, the program WINRAR is required and can be downloaded from this link: WINRAR Download
    3. Copy the ISPBOOT.BIN file to an empty USB Thumb Drive formatted to FAT32.
    4. Insert the USB Thumb Drive with Update Firmware into the CAR813 USB/Charging Port.
    5. Navigate to Settings and scroll till you get to the About button on the left side of the menu.
    6. Press the About button and you will see on the right-hand side Software Update.
    7. Press Software Update and you will see the Update button. Press Update to begin the firmware upgrade.
    8. Once the update is complete, remove the USB thumb drive.
    9. The update is now complete.

    Download Firmware Zipped File: CAR813 Firmware Download

    To check that the update was done correctly, go to Settings and press Others and then press System Version. If you see the following information, the update was done correctly for model CAR813. – Version: 2.0.3 – Date: 20240311 – SDK: MJ2.2 54.0.20.0.2.6.1.0 – MCU: GD72-230712

Pass
42. Product: Dash Mount 7” Touchscreen Monitor – JC7DM
Product URL: https://jensenmobile.com/shop/dash-mount/jc7dm/
Firmware Links:
    Firmware Update(s): THIS UPDATE ADDRESSES THE FOLLOWING: Updates the Safety Notice screen to disappear automatically after 2 seconds without touch confirmation. Note: 1.Software is not interchangeable between models. Please do not attempt this update on any other model other than the JC7DM. 2. Do not remove the USB stick until the radio says to do so. If removed during the update, the radio will be non-functioning. Download JC7DM Firmware Upgrade method: 1. Put all the files contained in the Software folder onto the USB thumb drive 2. Plug the USB thumb drive into the USB port of the JC7DM and click Confirm in the dialog box. 3. The update will begin automatically and continue to upgrade the APP and MCU. 4. Once the update has completed, click OK in the dialog box when it appears.

Pass
43. Product: Dash Mount 7” Touchscreen Monitor – JDASHCP
Product URL: https://jensenmobile.com/shop/dash-mount/jdashcp/
Firmware Links:
    Firmware Update(s): THIS UPDATE ADDRESSES THE FOLLOWING: Updates the Safety Notice screen to disappear automatically after 2 seconds without touch confirmation. Note: 1.Software is not interchangeable between models. Please do not attempt this update on any other model other than the JDASHCP. 2. Do not remove the USB stick until the radio says to do so. If removed during the update, the radio will be non-functioning. Download JDASHCP Firmware Upgrade method: 1. Put all the files contained in the Software folder onto the USB thumb drive 2. Plug the USB thumb drive into the USB port of the JDASHCP and click Confirm in the dialog box. 3. The update will begin automatically and continue to upgrade the APP and MCU. 4. Once the update has completed, click OK in the dialog box when it appears.

Pass
44. Product: 7” Media Receiver with Wireless Android Auto and Apple CarPlay – J3CA7W
Product URL: https://jensenmobile.com/shop/multimedia/j3ca7w/
Firmware Links:

    Firmware Update Instructions

    This update addresses the following:
    • Improved touchscreen response time.
    • Change the Safety Notice screen to disappear automatically after 2 seconds.
    • Change Rear Camera View settings from on to off (default: OFF).
    • Add Time Sync Settings - OFF/GPS/RDS/Phone (default: OFF).
    Note: Software is not interchangeable between models. Please do not attempt this update on any model other than the J3CA7W.

    How to Update:

    1. Download the firmware file from the link below.
    2. Unzip the downloaded file. Note: To unzip the file, the program WINRAR is required and can be downloaded from this link: WINRAR Download
    3. Copy the ISPBOOT.BIN file to an empty USB Thumb Drive formatted to FAT32.
    4. Insert the USB Thumb Drive with Update Firmware into the J3CA7W USB/Charging Port.
    5. Navigate to Settings and scroll till you get to the About button on the left side of the menu.
    6. Press the About button and you will see on the right-hand side Software Update.
    7. Press Software Update and you will see the Update button. Press Update to begin the firmware upgrade.
    8. Once the update is complete, remove the USB thumb drive.
    9. The update is now complete.
    Download Firmware Zipped File: J3CA7W Firmware Download

Pass
45. Product: 7” Receiver with Wireless Android Auto & Apple Carplay – CAR723W
Product URL: https://jensenmobile.com/shop/multimedia/car723w/
Firmware Links:

    Firmware Update Instructions

    This update addresses the following:
    • Improved touchscreen response time.
    • Change the Safety Notice screen to disappear automatically after 2 seconds.
    • Change Rear Camera View settings from on to off (default: OFF).
    • Add Time Sync Settings - OFF/GPS/RDS/Phone (default: OFF).
    Note: Software is not interchangeable between models. Please do not attempt this update on any model other than the CAR723W.

    How to Update:

    1. Download the firmware file from the link below.
    2. Unzip the downloaded file. Note: To unzip the file, the program WINRAR is required and can be downloaded from this link: WINRAR Download
    3. Copy the ISPBOOT.BIN file to an empty USB Thumb Drive formatted to FAT32.
    4. Insert the USB Thumb Drive with Update Firmware into the CAR723W USB/Charging Port.
    5. Navigate to Settings and scroll till you get to the About button on the left side of the menu.
    6. Press the About button and you will see on the right-hand side Software Update.
    7. Press Software Update and you will see the Update button. Press Update to begin the firmware upgrade.
    8. Once the update is complete, remove the USB thumb drive.
    9. The update is now complete.
    Download Firmware Zipped File: CAR723W Firmware Download

Pass
46. Product: 7″ Receiver with Wireless Apple CarPlay and Android Auto – CAR710W-BC
Product URL: https://jensenmobile.com/shop/multimedia/car710w-bc/
Firmware Links:
Model number missing from firmware URL
    This update addresses the following:
    • Improves the screen resolution while in Apple CarPlay or Android Auto
    • Fixes an issue when using the Waze app
    • Improves USB random playback issue
    • Updates GPS location
    • Fixes an issue of the steering wheel controls with SiriusXM
    • Add programmable volume feature
    Note: Software is not interchangeable between models. Please do not attempt this update on any other model then the CAR710W Download File: CAR710W Firmware How to Update:
    1. Download the firmware file from the link above.
    2. Unzip the downloaded file. (NOTE: To unzip the file, the program WINRAR is required and can be downloaded from this link: https://www.rarlab.com/download.htm)
    3. Copy the 2 ISPBOOT.BIN files to an empty USB Thumb Drive formatted to FAT32.
    4. With the vehicle Off, insert the USB Thumb Drive with Update Firmware into the CAR710W USB Port.
    5. Turn the vehicle On, the radio will boot up with the update screen.
    6. Once the update is complete, remove the USB thumb drive and turn the radio off and then back on so the firmware update is completed.
    7. The updates are now completed.
    To check that the update was done correctly, go to Settings and press Others and then press System Version. If you see the information listed below, the update was done correctly. – Version: CAR710W V1.0 8368U –  Date: 20221117_1909 – SDK: 54.0.16.0.0.0.4.0 – MCU: SP_H_303_20221025_01_BJ0.W  

Fail
Discrepancy found: Model number car710w-bc not in firmware URL
47. Product: 7” Dash Mount Touchscreen
Product URL: https://jensenmobile.com/shop/dash-mount/dash-mount-promo/
Firmware Links:
Model number missing from firmware URL
    Firmware Update(s): THIS UPDATE ADDRESSES THE FOLLOWING: Updates the Safety Notice screen to disappear automatically after 2 seconds without touch confirmation. Note: 1.Software is not interchangeable between models. Please do not attempt this update on any other model other than the JDASHCP. 2. Do not remove the USB stick until the radio says to do so. If removed during the update, the radio will be non-functioning. Download JDASHCP Firmware Upgrade method: 1. Put all the files contained in the Software folder onto the USB thumb drive 2. Plug the USB thumb drive into the USB port of the JDASHCP and click Confirm in the dialog box. 3. The update will begin automatically and continue to upgrade the APP and MCU. 4. Once the update has completed, click OK in the dialog box when it appears.

Fail
Discrepancy found: Model number touchscreen not in firmware URL
48. Product: 10.1″ Media Receiver with Backup Camera – J1CA10FL-BUC
Product URL: https://jensenmobile.com/shop/multimedia/j1ca10fl-buc/
Firmware Links:
Model number missing from firmware URL

    Firmware Update Instructions

    This update addresses the following:

    • Improved touchscreen response time.
    • Change the Safety Notice screen to disappear automatically after 2 seconds.
    • Change Rear Camera View settings from on to off (default: OFF).
    • Add Time Sync Settings - OFF/GPS/RDS/Phone (default: OFF).

    Note: Software is not interchangeable between models. Please do not attempt this update on any model other than the J1CA10FL.

    How to Update:

    1. Download the firmware file from the link below.
    2. Unzip the downloaded file. Note: To unzip the file, the program WINRAR is required and can be downloaded from this link: WINRAR Download
    3. Copy the ISPBOOT.BIN file to an empty USB Thumb Drive formatted to FAT32.
    4. Insert the USB Thumb Drive with Update Firmware into the J1CA10FL USB/Charging Port.
    5. Navigate to Settings and scroll till you get to the About button on the left side of the menu.
    6. Press the About button and you will see on the right-hand side Software Update.
    7. Press Software Update and you will see the Update button. Press Update to begin the firmware upgrade.
    8. Once the update is complete, remove the USB thumb drive.
    9. The update is now complete.

    Download Firmware Zipped File: J1CA10FL Firmware Download

    To check that the update was done correctly, go to Settings and press Others and then press System Version. If you see the following information, the update was done correctly for model J1CA10FL. – Version: 2.0.3 – Date: 20240311 – SDK: MJ2.2 54.0.20.0.2.6.1.0 – MCU: GD72-230712

Fail
Discrepancy found: Model number j1ca10fl-buc not in firmware URL
49. Product: 10.1” LED Backlit Touchscreen Car Radio/AV Receiver – CAR140MW
Product URL: https://jensenmobile.com/shop/multimedia/car140mw/
Firmware Links:

    Firmware Update Instructions

    This update addresses the following:
    • Improves settings issue of iDatalink Maestro Module
    Note: Software is not interchangeable between models. Please do not attempt this update on any model other than the CAR140MW.

    How to Update:

    1. Download the firmware file from the link below.
    2. Unzip the downloaded file. Note: To unzip the file, the program WINRAR is required and can be downloaded from this link: WINRAR Download
    3. Copy the ISPBOOT.BIN file to an empty USB Thumb Drive formatted to FAT32.
    4. Insert the USB Thumb Drive with Update Firmware into the CAR140MW USB A Port.
    5. Navigate to Settings and scroll till you get to the About button on the left side of the menu.
    6. Press the About button and you will see on the right-hand side Software Update.
    7. Press Software Update and you will see the Update button. Press Update to begin the firmware upgrade.
    8. Once the update is complete, remove the USB thumb drive.
    9. The update is now complete.
    Download Firmware Zipped File: CAR140MW Firmware Download

Pass
50. Product: Car Radio with 7″ Touchscreen – CAR714MW
Product URL: https://jensenmobile.com/shop/multimedia/car714mw/
Firmware Links:

    Firmware Update Instructions

    This update addresses the following:
    • Improves settings issue of iDatalink Maestro Module
    Note: Software is not interchangeable between models. Please do not attempt this update on any model other than the CAR714MW.

    How to Update:

    1. Download the firmware file from the link below.
    2. Unzip the downloaded file. Note: To unzip the file, the program WINRAR is required and can be downloaded from this link: WINRAR Download
    3. Copy the ISPBOOT.BIN file to an empty USB Thumb Drive formatted to FAT32.
    4. Insert the USB Thumb Drive with Update Firmware into the CAR714MW USB-A Port.
    5. Navigate to Settings and scroll till you get to the About button on the left side of the menu.
    6. Press the About button and you will see on the right-hand side Software Update.
    7. Press Software Update and you will see the Update button. Press Update to begin the firmware upgrade.
    8. Once the update is complete, remove the USB thumb drive.
    9. The update is now complete.
    Download Firmware Zipped File: CAR714MW Firmware Download

Pass
51. Product: Jensen CAR723W-BC 7” Touchscreen Receiver with Backup Camera
Product URL: https://jensenmobile.com/shop/multimedia/car723w-bc/
Firmware Links:

    Firmware Update Instructions

    This update addresses the following:
    • Improved touchscreen response time.
    • Change the Safety Notice screen to disappear automatically after 2 seconds.
    • Change Rear Camera View settings from on to off (default: OFF).
    • Add Time Sync Settings - OFF/GPS/RDS/Phone (default: OFF).
    Note: Software is not interchangeable between models. Please do not attempt this update on any model other than the CAR723W.

    How to Update:

    1. Download the firmware file from the link below.
    2. Unzip the downloaded file. Note: To unzip the file, the program WINRAR is required and can be downloaded from this link: WINRAR Download
    3. Copy the ISPBOOT.BIN file to an empty USB Thumb Drive formatted to FAT32.
    4. Insert the USB Thumb Drive with Update Firmware into the CAR723W USB/Charging Port.
    5. Navigate to Settings and scroll till you get to the About button on the left side of the menu.
    6. Press the About button and you will see on the right-hand side Software Update.
    7. Press Software Update and you will see the Update button. Press Update to begin the firmware upgrade.
    8. Once the update is complete, remove the USB thumb drive.
    9. The update is now complete.
    Download Firmware Zipped File: CAR723W Firmware Download

Pass
52. Product: Jensen CAR723W-CAM 7” Multimedia Receiver with Backup Camera
Product URL: https://jensenmobile.com/shop/multimedia/car723w-cam/
Firmware Links:

    Firmware Update Instructions

    This update addresses the following:
    • Improved touchscreen response time.
    • Change the Safety Notice screen to disappear automatically after 2 seconds.
    • Change Rear Camera View settings from on to off (default: OFF).
    • Add Time Sync Settings - OFF/GPS/RDS/Phone (default: OFF).
    Note: Software is not interchangeable between models. Please do not attempt this update on any model other than the CAR723W.

    How to Update:

    1. Download the firmware file from the link below.
    2. Unzip the downloaded file. Note: To unzip the file, the program WINRAR is required and can be downloaded from this link: WINRAR Download
    3. Copy the ISPBOOT.BIN file to an empty USB Thumb Drive formatted to FAT32.
    4. Insert the USB Thumb Drive with Update Firmware into the CAR723W USB/Charging Port.
    5. Navigate to Settings and scroll till you get to the About button on the left side of the menu.
    6. Press the About button and you will see on the right-hand side Software Update.
    7. Press Software Update and you will see the Update button. Press Update to begin the firmware upgrade.
    8. Once the update is complete, remove the USB thumb drive.
    9. The update is now complete.
    Download Firmware Zipped File: CAR723W Firmware Download

Pass
53. Product: 8″ Touchscreen Car Stereo w/ CarPlay, Android Auto & Backup Cam – J1CA8FL-BUC
Product URL: https://jensenmobile.com/shop/multimedia/j1ca8fl-buc/
Firmware Links:
Model number missing from firmware URL

    Firmware Update Instructions

    This update addresses the following:
    • Improved touchscreen response time.
    • Change the Safety Notice screen to disappear automatically after 2 seconds.
    • Change Rear Camera View settings from on to off (default: OFF).
    • Add Time Sync Settings - OFF/GPS/RDS/Phone (default: OFF).
    Note: Software is not interchangeable between models. Please do not attempt this update on any model other than the J1CA8FL.

    How to Update:

    1. Download the firmware file from the link below.
    2. Unzip the downloaded file. Note: To unzip the file, the program WINRAR is required and can be downloaded from this link: WINRAR Download
    3. Copy the ISPBOOT.BIN file to an empty USB Thumb Drive formatted to FAT32.
    4. Insert the USB Thumb Drive with Update Firmware into the J1CA8FL USB/Charging Port.
    5. Navigate to Settings and scroll till you get to the About button on the left side of the menu.
    6. Press the About button and you will see on the right-hand side Software Update.
    7. Press Software Update and you will see the Update button. Press Update to begin the firmware upgrade.
    8. Once the update is complete, remove the USB thumb drive.
    9. The update is now complete.
    Download Firmware Zipped File: J1CA8FL Firmware Download To check that the update was done correctly, go to Settings and press Others and then press System Version. If you see the following information, the update was done correctly for model J1CA8FL. – Version: 2.0.3 – Date: 20240311 – SDK: MJ2.2 54.0.20.0.2.6.1.0 – MCU: GD72-230712

Fail
Discrepancy found: Model number j1ca8fl-buc not in firmware URL
54. Product: Jensen J3CA7W Multimedia Receiver with Wireless CarPlay and Backup Camera
Product URL: https://jensenmobile.com/shop/multimedia/j3ca7w-buc/
Firmware Links:

    Firmware Update Instructions

    This update addresses the following:
    • Improved touchscreen response time.
    • Change the Safety Notice screen to disappear automatically after 2 seconds.
    • Change Rear Camera View settings from on to off (default: OFF).
    • Add Time Sync Settings - OFF/GPS/RDS/Phone (default: OFF).
    Note: Software is not interchangeable between models. Please do not attempt this update on any model other than the J3CA7W.

    How to Update:

    1. Download the firmware file from the link below.
    2. Unzip the downloaded file. Note: To unzip the file, the program WINRAR is required and can be downloaded from this link: WINRAR Download
    3. Copy the ISPBOOT.BIN file to an empty USB Thumb Drive formatted to FAT32.
    4. Insert the USB Thumb Drive with Update Firmware into the J3CA7W USB/Charging Port.
    5. Navigate to Settings and scroll till you get to the About button on the left side of the menu.
    6. Press the About button and you will see on the right-hand side Software Update.
    7. Press Software Update and you will see the Update button. Press Update to begin the firmware upgrade.
    8. Once the update is complete, remove the USB thumb drive.
    9. The update is now complete.
    Download Firmware Zipped File: J3CA7W Firmware Download

Pass